Mimix’s acquisition of Celeritek in June 2005 allowed us to apply twenty years of product development history to serve the defense and space markets. This is a diverse marketplace, encompassing applications from satellite and signal intelligence to defense systems and aircraft platforms. Mimix has long been a leading supplier of power amplifier MMICs and modules with a tradition of advanced technology and superior quality. Within the next ten years, defense electronics products must satisfy a number of requirements, not the least of which will be high performance at a practical cost. Today, we are able to leverage our volume commercial products and technologies to offer our customers the best overall value in microwave and millimeter-wave ICs, space-qualified devices, and amplifier-based modules.

Click here to download our Defense & Space brochure.
Click here to view our Space Qualification process flows.

	.	Final – MMICs in full production
		Preliminary (Pre-production) – Full device characterization completed and transitioning to production
		Advanced – Product in development; samples may be available.
		Discontinued
Markets/Notices –- Infrastructure (I) | SatCom (S) | Point-to-point (P) | Defense & Space (D) | Space Qualified (Space)

Buffer Amplifiers

Description Part # Frequency (GHz) Gain (dB) Gain Flatness (dB) Noise Figure (dB) Output P 1 dB (dBm) OIP3 (dBm) Bias (mA @ V) Package DXF Markets/ Notices Buffer Amplifier (Single Supply/QFN) CMM2000-QT 1.5-6.0 13.0 +/-1.0 6.0 5.5 +14.0 +12.0 +24.0 35 @ 8.0 35 @ 5.0 -QT 3x3mm I / S / P / D Buffer Amplifier (Single Supply/QFN) CMM9000-QT 1.5-6.0 15.0 +/-1.5 5.5 5.5 +15.0 +14.0 +25.0 +24.0 60 @ 6.0 60 @ 5.0 -QT 3x3mm I / S / P / D Buffer Amplifier / Gain Block CMM-5-BD 2.0-6.0 16.5 +/- 1.0 5.5 +18.0 +28.0 100 @ 6.0 DIE Outline S-Param I / D Buffer Amplifier / Gain Block CMM-9-BD 2.0-9.0 13.0 +/- 1.5 5.5 +17.0 +27.0 80 @ 6.0 DIE Outline S-Param I / D Space Buffer Amplifier / Gain Block CMM-2-BD 2.0-10.0 12.5 +/- 0.5 5.5 +10.0 +20.0 35 @ 8.0 DIE Outline I / D Buffer Amplifier (Single Supply) CMM4000-BD 2.0-18.0 8.5 +/- 0.5 4.5 +19.0 +29.0 115 @ 5.0 DIE Outline S-Param P / D Buffer Amplifier (Single Supply/QFN) CMM0511-QT 5.0-14.0 20.0 +/- 1.1 7.0 +11.0 +22.0 90 @ 6.0 -QT 3x3mm S-Param I / S / P / D Buffer Amplifier XB1008-BD 10.0-21.0 18.0 +/-2.0 5.5 +20.0 +30.0 100 @ 4.0 DIE Outline S / P / D Buffer Amplifier (QFN) XB1008-QT 10.0-21.0 17.0 +/-2.0 4.5 +19.0 +32.0 100 @ 4.0 -QT 3x3mm S-Param Layout S / P / D Buffer Amplifier (Single Supply/QFN) CMM1118-QT 11.0-20.0 20.0 +/- 2.0 8.0 +14.0 +22.0 90 @ 5.0 -QT 3x3mm S-Param S / P / D Buffer Amplifier (QFN) XB1013-QT 17.0-40.0 28.0 +/-0.5 - +18.0 +30.0 330 @ 4.0 -QT 3x3mm S / P / D Buffer Amplifier (Low Noise/Power) XB1006-BD 18.0-38.0 21.0 +/- 2.0 3.2 / 4.5 +9.0 / +15.0 +19.0 / +25.0 50 @ 3.5 / 100 @ 5.5 DIE Outline  S-Param P / D Buffer Amplifier (Low Noise/Power) XB1005-BD 35.0-45.0 19.0 / 23.0 +/- 1.0 2.7 / 3.7 +13.0 / +16.0 +23.0 / +26.0 50 @ 3.5 / 154 @ 4.5 DIE Outline  S-Param P / D Buffer Amplifier (QFN) XB1014-QT 37.0-40.0 20.0 +/-0.5 6.0 +20.0 +30.0 250 @ 4.0 -QT 3x3mm S / P / D

Back To Top

.

Distributed Amplifiers

Description Part # Frequency (GHz) Gain (dB) Gain Flatness (dB) Noise Figure (dB) Output P 1 dB (dBm) OIP3 (dBm) Bias (mA @ V) Package DXF Markets/ Notices Distributed Amplifier CMM3020-BD .0003-20.0 10.0 +/- 0.5 6.5 +23.0 +30.0 250 @ 8.0 DIE Outline I / D Distributed Amplifier (QFN) XD1008-QH .0003-26.5 26.5-32.0 17.0 17.0 +/-1.0 +/-1.0 3.0 3.0 +22.5 +20.0 +32.0 +28.0 200 @ 7.0 -QH 4x4mm I / P / D Distributed Amplifier CMM2030-BD .0003-30.0 12.0 +/- 0.5 4.5 +18.0 +31.0 100 @ 5.0 DIE Outline S-Param I / D Distributed Amplifier CMM3030-BD .0003-30.0 9.0 +/- 0.5 4.5 +23.0 +30.0 275 @ 8.0 DIE Outline I / D Distributed Amplifier XD1008-BD .0003-40.0 15.0 +/-0.75 3.5 +22.5 +27.0 200 @ 7.0 DIE Outline S-Param Layouts A & B I / P / D Distributed Amplifier (Gain Control) XD1002-BD 0.05-50.0 9.0 +/- 1.5 5.0 +9.0 +17.0 120 @ 8.5 DIE Outline S-Param I / P / D Distributed Amplifier CMM4000-BD 2.0-18.0 8.5 +/-0.5 4.5 +19.0 +29.0 115 @ 5.0 DIE Outline S-Param P / D Distributed Amplifier CMM0014-BD 2.0-22.0 11.0 +/- 0.5 7.0 +24.0 +36.0 300 @ 8.0 DIE Outline S-Param I / D App Note Space Distributed Amplifier CMM0015-BD 2.0-22.0 10.0 +/- 1.5 7.5 +28.0 +35.0 350 @ 12.0 DIE Outline S-Param I / D Distributed Amplifier CMM0016-BD 2.0-22.0 9.0 +/-1.5 7.5 +30.0 +37.0 690 @ 11.5 DIE Outline S-Param I / D Distributed Amplifier (Gain Control) XD1001-BD 18.0- 50.0 17.0 +/- 1.0 5.0 +15.0 +23.0 160 @ 5.0 DIE Outline S-Param I / P / D

Back To Top

.

GaAs FETs, Die

Part # Frequency (GHz) P1dB (dBm) MSG (dB) OIP3 (dBm) NF (dB) Idss (mA) Test Volts (V) Rth Deg/W Die Size (um) Gate W/L (um) Markets/ Notices CF007-01-BD DC-20.0 +16.0 18.9 +27.0 2.2 60 +3.0 to +5.5 150 420x250 S-Param Dual Gate 300/0.5 I / S / P / D CF010-01-BD DC-22.0 +28.0 15.0 +38.0 - 700 +6.0 25 850x320 S-Param 2400/≤0.5 I / S / P / D CF005-01-BD DC-24.0 +25.0 15.5 +35.0 - 310 +6.0 50 470x320 S-Param 1200/≤0.5 I / S / P / D CF015-11-BD DC-24.0 +25.0 16.0 +33.0 - 310 +6.0 40 1350x250 S-Param 1200/≤0.3 I / S / P / D CF003-01-BD DC-26.0 +22.0 15.0 +32.0 1.8 180 +3.0 to +6.0 80 720x250 S-Param 600/0.3 I / S / P / D Space CF001-01-BD DC-32.0 +19.0 17.5 +29.0 1.6 60 +3.0 to +6.0 150 400x250 S-Param 300/0.3 I / S / P / D Space CF003-03-BD DC-34.0 +20.0 15.5 +30.0 1.0 180 +3.0 to +6.0 80 720x250 S-Param 600/0.3 I / S / P / D Space CF001-03-BD DC-40.0 +17.0 18.5 +27.0 0.8 60 +3.0 to +6.0 150 400x250 S-Param 300/0.3 I / S / P / D Space CF004-01-BD DC-40.0 +15.0 15.0 +25.0 2.2 30 +3.0 to +6.0 300 230x250 150/0.3 I / S / P / D CF004-03-BD DC-45.0 +13.0 16.0 +23.0 1.5 30 +3.0 to +6.0 300 230x250 150/0.3 I / S / P / D Space Unless otherwise specified, data is @ 12 GHz

Back To Top

.

Gain Blocks: InGaP HBT

Part # Freq (GHz) P1dB (dBm) Gain (dB) OIP3 (dBm) NF (dB) Icc (mA) Vd / Vs (Volts) Rth Deg/W Package DXF Markets/ Notices CGB7289-BD (@ 2140 MHz) DC-2.5 +23.7 13.5 +41.0 5.5 115 +4.76 / +7.0 35 DIE Outline I / S / P / D App Note CGB7389-SC (@ 2450 MHz) DC-2.7 +23.5 13.0 +40.5 4.5 115 +5.3 / +7.0 35 -SC -SC S-Param Tape & Reel I / S / P / D CGB7001-BD DC-6.0 +14.2 20.5 +28.0 3.3 35 +4.1 / +5.0 110 DIE Outline I / S / P / D App Note CGB7001-SC DC-6.0 +14.2 20.5 +28.0 3.3 35 +4.1 / +5.0 110 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2 CGB7001-SP DC-6.0 +14.2 20.5 +28.0 3.3 35 +4.1 / +5.0 110 -SP -SP S-Param I / S / P / D App Note CGB7003-BD DC-6.0 +16.6 20.7 +31.5 2.9 50 +4.0 / +5.0 85 DIE Outline S-Param I / S / P / D App Note CGB7003-SC DC-6.0 +16.6 20.7 +31.5 2.9 50 +4.0 / +5.0 85 -SC -SC S-Param Tape & Reel I / S / P / D App Note1, 2  CGB7003-SP DC-6.0 +16.6 20.7 +31.5 2.9 50 +4.0 / +5.0 85 -SP -SP S-Param I / S / P / D App Note CGB7004-BD DC-6.0 +17.0 16.5 +32.0 3.6 62 +4.2 / +5.0 85 DIE Outline S-Param I / S / P / D App Note CGB7004-SC DC-6.0 +17.0 16.5 +32.0 3.6 62 +4.2 / +5.0 85 -SC -SC S-Param Tape & Reel I / S / P / D App Note1, 2  CGB7005-BD DC-6.0 +17.6 21.0 +32.5 3.2 63 +4.15 / +5.0 85 DIE Outline S-Param I / S / P / D App Note CGB7005-SC DC-6.0 +17.6 21.0 +32.5 3.2 63 +4.15 / +5.0 85 -SC -SC S-Param Tape & Reel I / S / P / D App Note1, 2  CGB7005-SP DC-6.0 +17.6 21.0 +32.5 3.2 63 +4.15 / +5.0 85 -SP -SP S-Param I / S / P / D App Note CGB7006-BD DC-6.0 +18.0 15.2 +33.5 4.1 64 +5.08 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7006-SC DC-6.0 +18.0 15.2 +33.5 4.1 64 +5.08 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7007-BD DC-6.0 +18.8 19.0 +34.0 4.5 67 +4.95 / +7.0 90 DIE Outline S-Param I / S / P / D App Note CGB7007-SC DC-6.0 +18.8 19.0 +34.0 4.5 67 +4.95 / +7.0 90 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7008-BD DC-6.0 +18.8 21.2 +33.5 3.2 64 +5.15 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7008-SC DC-6.0 +18.8 21.2 +33.5 3.2 64 +5.15 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7008-SP DC-6.0 +18.8 21.2 +33.5 3.2 64 +5.15 / +7.0 80 -SP -SP S-Param I / S / P / D App Note CGB7009-BD DC-6.0 +19.2 16.8 +35.3 3.9 73 +5.4 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7009-SC DC-6.0 +19.2 16.8 +35.3 3.9 73 +5.4 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7010-BD DC-6.0 +20.0 21.5 +35.5 3.2 75 +5.18 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7010-SC DC-6.0 +20.0 21.5 +35.5 3.2 75 +5.18 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7010-SP DC-6.0 +20.3 21.5 +35.5 3.2 75 +5.18 / +7.0 80 -SP -SP S-Param  I / S / P / D App Note CGB7011-BD DC-6.0 +21.0 21.7 +36.0 3.4 82 +5.4 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7011-SC DC-6.0 +21.0 21.7 +36.0 3.4 82 +5.4 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7011-SP DC-6.0 +21.0 21.7 +36.0 3.4 82 +5.4 / +7.0 80 -SP -SP S-Param I / S / P / D App Note CGB7012-BD DC-6.0 +20.3 15.7 +36.0 4.3 83 +5.48 / +7.0 80 DIE Outline S-Param I / S / P / D App Note CGB7012-SC DC-6.0 +20.3 15.7 +36.0 4.3 83 +5.48 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7015-BD DC-6.0 +21.1 23.0 +37.0 4.0 92 +4.8 / +7.0 80 DIE Outline I / S / P / D App Note CGB7015-SC DC-6.0 +21.1 23.0 +37.0 4.0 92 +4.8 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note CGB7016-BD DC-6.0 +18.4 22.4 +34.0 3.8 78 +4.3 / +5.0 85 DIE Outline I / S / P / D App Note CGB7016-SC DC-6.0 +18.4 22.4 +34.0 3.8 78 +4.3 / +5.0 85 -SC -SC S-Param Tape & Reel I / S / P / D App Note CGB7014-BD DC-8.0 +20.3 24.5 +36.0 3.5 80 +4.75 / +7.0 80 DIE Outline I / S / P / D App Note CGB7014-SC DC-8.0 +20.3 24.5 +36.0 3.5 80 +4.75 / +7.0 80 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  CGB7017-BD DC-8.0 +18.2 23.1 +33.8 3.3 70 +4.5 / +5.0 85 DIE Outline I / S / P / D App Note CGB7017-SC DC-8.0 +18.2 23.1 +33.8 3.3 70 +4.5 / +5.0 85 -SC -SC S-Param Tape & Reel I / S / P / D App Note 1, 2  Unless otherwise specified, data is @ 900 MHz Vs is supply voltage *balanced configuration

Back To Top

.

Gain Blocks: MESFET

Part # Freq (GHz) P1dB (dBm) Gain (dB) OIP3 (dBm) NF (dB) Icc (mA) Vd (Volts) Rth Deg/W Package DXF Markets/ Notices CMM6003-SC 0.05-0.9 +22.0 17.0 +41.0 1.6 150 +3.0 to +5.0 59 -SC -SC S-Param Tape & Reel I / S / P / D CMM6001-BD 0.05-3.0 +20.5 12.5 +37.0 2.8 75 +3.0 to +5.0 65 DIE Outline I / S / P / D CMM6001-SC 0.05-3.0 +20.5 12.5 +37.0 2.8 75 +3.0 to +5.0 65 -SC -SC S-Param Tape & Reel I / S / P / D CMM6004-BD 0.05-3.0 +23.0 16.5 +41.0 1.8 150 +3.0 to +5.0 52 DIE Outline I / S / P / D CMM6004-SC 0.05-3.0 +23.0 16.5 +41.0 1.8 150 +3.0 to +5.0 52 -SC -SC S-Param I-V Curves Tape & Reel I / S / P / D Notice CDQ6004-QS (dual channel*) 0.05-4.0 +23.0 (+26.0*) 16.5 +41.0 (+44.0*) 2.1 150 +3.0 to +5.0 52 -QS -QS (4x4mm) I / S / P / D XG1001-SA (dual channel*) 0.05-4.0 +22.5 (+26.0*) 13.0 +41.0 (+44.0*) 2.1 150 +3.0 to +5.0 27 -SA -SA (SOIC-8) S-Param I / S / P / D CMM6004-AH (@ 2 GHz) 0.05-6.0 +23.0 15.0 +41.0 1.7 150 +3.0 to +5.0 50 -AH -AH (3x3mm) S-Param I / S / P / D CMM2308-AJ 0.8-2.7 +17.0 19.0 +27.0 2.2 75 +3.0 to +6.0 55 -AJ -AJ (SOIC-8) S-Param I / S / P / D Space CMM2306-AJ 0.8-2.7 +17.5 20.0 +26.0 3.5 75 +3.0 to +6.0 55 -AJ -AJ (SOIC-8) I / S / P / D Unless otherwise specified, data is @ 900 MHz *balanced configuration

Back To Top

.

Low Noise Amplifiers

Description Part # Frequency (GHz) Gain (dB) Gain Flatness (dB) Noise Figure (dB) Output P 1 dB (dBm) OIP3 (dBm) Bias (mA @ V) Package DXF Markets/ Notices Low Noise Amplifier (Single Supply) CMM1100-BD 2.0-18.0 17.0 +/-0.5 3.5 +16.0 +26.0 100 @ 5.0 DIE Outline S-Param I / S / P / D Space Low Noise Amplifier (Single Supply/SMT) CMM1100-QF 2.0-18.0 15.0 +/-1.0 3.8 +15.0 +25.0 100 @ 5.0 -QF 4x4mm S-Param Layout I / S / P / D Low Noise Amplifier (Single Supply) CMM4000-BD 2.0-18.0 8.5 +/- 0.5 4.5 +19.0 +29.0 115 @ 5.0 DIE Outline S-Param I / S / D Low Noise Amplifier (Single Supply) XL1018-BD 7.0-14.0 20.0 +/-0.5 1.7 +10.0 +20.0 60 @ 5.0 DIE Outline S-Param S / P / D Low Noise Amplifier (Single Supply) XL1018-QT 7.0-14.0 20.0 +/-0.5 1.7 +10.0 +20.0 60 @ 5.0 -QT 3x3mm S / P / D Low Noise Amplifier (Balanced/Single Supply) XL1001-BD 17.0-35.0 14.0 +/- 1.5 2.5 +4.0 +16.0 55 @ 5.0 DIE Outline S-Param P / D Low Noise Amplifier (Balanced/Single Supply) XL1002-BD 20.0-36.0 23.0 +/- 1.5 2.6 +4.0 +16.0 85 @ 5.0 DIE Outline S-Param P / D Low Noise Amplifier XL1010-BD 20.0-38.0 17.0 +/-2.0 3.0 - - 45 @ 4.0 DIE - I / S / P / D Low Noise Amplifier (QFN) XL1010-QT 20.0-38.0 17.0 +/-2.0 3.0 - - 45 @ 4.0 -QT 3x3mm Layout S-Param I / S / P / D Low Noise Amplifier (Single Supply) XL1000-BD 20.0-40.0 20.0 +/- 4.0 2.0 +9.0 +16.0 35 @ 3.0 / 50 @ 5.0 DIE Outline S-Param S / P / D Low Noise Amplifier (Low Noise/Power) XB1005-BD 35.0-45.0 19.0 +/- 1.0 2.7 +13.0 +23.0 50 @ 3.5 DIE Outline S-Param P / D Low Noise Amplifier (Balanced/Single Supply) XL1004-BD 35.0-45.0 17.0 +/- 2.0 2.0 +6.0 +14.0 85 @ 4.0 DIE Outline P / D

Back To Top

.

Low Noise GaAs FETs, Packaged

Part # Freq (GHz) Gain (dB) Noise Figure (dB) Output P1dB (dBm) OIP3 (dBm) Bias (mA @ V) Package Markets/ Notices CDQ0303-QS (dual channel*) DC-10.0 23.5 0.5 +17.0 (+20.0*) +32.0 (+35.0*) 50 @ 3.0 -QS (4x4mm) S-Param I / D CFP0103-SP DC-10.0 22.0 0.5 +17.0 +29.0 40 @ 3.0 -SP (SOT-86) I / D CFP0303-SP DC-10.0 22.0 0.5 +17.0 +32.0 60 @ 3.0 -SP (SOT-86) I / D CFS0103-SB DC-10.0 22.0 0.5 +17.0 +29.0 40 @ 3.0 -SB (SOT-343) S-Param I / D App Note CFS0303-SB DC-10.0 22.4 0.2 +17.0 +32.0 60 @ 3.0 -SB (SOT-343) S-Param & More I / D CFB0101-B DC-15.0 21.5 1.0 +18.5 +28.0 40 @ 6.0 -B (Micro-X) I / D CFB0103-B DC-15.0 22.0 0.7 +19.0 +29.0 15 @ 3.0 -B (Micro-X) S-Param I / D CFB0301-B DC-15.0 17.0 0.8 +21.0 +34.0 70 @ 4.0 -B (Micro-X) S-Param I / D CFB0303-B DC-15.0 20.0 0.5 +21.0 +34.0 75 @ 4.0 -B (Micro-X) S-Param I / D CFA0101-A (@ 12 GHz) DC-18.0 9.5 2.8 +19.5 +28.0 40 @ 6.0 -A (Micro-X, Hermetic) I / D Space CFA0103-A (@ 12 GHz) DC-18.0 11.0 0.7 +19.5 +29.0 15 @ 3.0 -A (Micro-X, Hermetic) I / D Space CFC0301-C (@ 12 GHz) DC-18.0 10.0 2.6 +23.0 +34.0 80 @ 6.0 -C (Flange) I / D Space Unless otherwise specified, data is @ 2 GHz *balanced configuration

Back To Top

.

Medium Power Amplifiers

Part # Freq (GHz) P1dB (dBm) Gain (dB) OIP3 (dBm) NF (dB) Icc (mA) Vd / Vs (Volts) Rth Deg/W Package DXF Markets/ Notices CGB7289-SC (@ 2140 MHz) DC-2.5 +23.7 13.5 +41.0 5.5 115 +4.76 / +7.0 35 -SC -SC S-Param Tape & Reel I / S / P / D App Note CGB7389-SC (@ 2450 MHz) DC-2.7 +23.5 13.0 +40.5 4.5 115 +5.3 / +7.0 35 -SC -SC S-Param Tape & Reel I / S / P / D CGB8001-SC (@ 2450 MHz) DC-2.8 +27.0 15.5 - 3.9 150 +5.0 / +5.0 35 -SC -SC S-Param Tape & Reel I / S / P / D CGB8002-SC (@ 2450 MHz) DC-2.8 +22.5 15.8 +37.0 4.7 120 +3.3 / +3.3 35 -SC -SC S-Param Tape & Reel I / S / P / D Vs is supply voltage

Back To Top

.

Mixers

Description Part # RF Frequency (GHz) LO Frequency (GHz) IF Frequency (GHz) Conversion Loss (dB) IIP3 (dBm) LO Input Power (dBm) DXF Markets/ Notices Balanced XU1014-BD 8.0-18.0 5.0-21.0 DC-3.5 10.0 +22.0 +5.0 Outline P / D Balanced (QFN) XU1014-QH 8.0-18.0 5.0-21.0 DC-3.5 10.0 +22.0 +5.0 -QH 4x4mm P / D Image Reject (QFN) XM1001-QH 10.0-33.0 8.0-36.0 DC-4.0 9.0 +25.0 +12.0 -QH 4x4mm P / D Image Reject XM1001-BD 12.0-40.0 8.0-42.0 DC-4.0 8.0 +24.0 +12.0 Outline P / D Space Balanced XU1010-BD 17.0-34.0 8.0-20.0 DC-3.5 10.0 +25.0 +2.0 Outline P / D Balanced (QFN) XU1010-QH 17.0-34.0 8.0-20.0 DC-3.5 10.0 +25.0 +2.0 -QH 4x4mm P / D Balanced XM1004-BD 18.0-40.0 14.0-44.0 DC-4.0 9.0 +25.0 +12.0 Outline P / D

Back To Top

.

Multipliers

Description Part # RF In (GHz) RF Out (GHz) Pin (dBm) Pout (dBm) Bias (mA @ V) DXF Markets/ Notices Doubler XX1002-BD 2.5-6.0 5.0-12.0 -3.0 +16.0 125 @ 5.0 Outline I / S / P / D Doubler (QFN) XX1002-QH 2.5-6.0 5.0-12.0 -3.0 +16.0 125 @ 5.0 -QH 4x4mm Layout I / S / P / D Doubler (QFN) XX1000-QT 7.5-22.5 15.0-45.0 +6.0 +18.0 200 @ 5.0 / 25 @ -2.0 -QT 3x3mm I / S / P / D Doubler XX1000-BD 7.5-25.0 15.0-50.0 +0.0 +15.0 200 @ 5.0 / 25 @ -2.0 Outline I / S / P / D Doubler XX1007-BD 13.5-17.0 27.0-34.0 +5.0 +21.0 200 @ 5.0 Outline I / S / P / D Doubler (Single Supply/QFN) XX1007-QT 13.5-17.0 27.0-34.0 +5.0 +21.0 200 @ 5.0 -QT 3x3mm I / S / P / D Doubler XX1001-BD 18.0-21.0 36.0-42.0 +0.0 +26.0 530 @ 4.5 Outline I / S / P / D Doubler (SMT) XX1001-QK 18.0-21.0 36.0-42.0 +0.0 +25.0 530 @ 4.5 -QK 7x7mm Layout I / S / P / D

Back To Top

.

Power Amplifiers

Description Part # Frequency (GHz) Gain (dB) Gain Flatness (dB) Output P1dB (dBm) OIP3 (dBm) Bias (mA @ V) Package DXF Markets/ Notices Power Amplifier CMM0014-BD 2.0-22.0 11.0 +/- 0.5 +24.0 +36.0 300 @ 8.0 DIE Outline S-Param I / D App Note Space Power Amplifier CMM0015-BD 2.0-22.0 10.0 +/- 1.5 +28.0 +35.0 350 @ 12.0 DIE Outline S-Param I / D Power Amplifier CMM0016-BD 2.0-22.0 9.0 +/-1.5 +30.0 +37.0 690 @ 11.5 DIE Outline S-Param I / D Power Amplifier XP1059-BD 13.5-15.0 28.0 +/-1.0 +36.0 +46.0 2.2 A @ 7.5 DIE Outline S-Param S / D Power Amplifier (QFN) CMQ1432-QH 13.5-15.5 32.0 +/- 2.0 +32.0 (Psat) - 770 @ 7.0 -QH 4x4mm S / D Power Amplifier XP1057-BD 13.5-16.0 17.0 +/-1.0 +39.0 +48.0 3.7 A @ 7.5 DIE Outline S-Param S2P S / P / D Power Amplifier XP1058-BD 14.5-16.0 27.0 +/-1.0 +36.0 +46.0 2.2 A @ 7.5 DIE Outline S-Param S / P / D Power Amplifier XP1070-BD 14.5-17.0 17.0 +/-1.0 +38.5 +46.0 3.7 A @ 7.5 DIE Outline S-Param S / P / D Power Amplifier XP1023-BD 24.0-34.0 16.0 +/- 1.0 +24.0 (Psat) - 320 @ 6.0 DIE Outline S / P / D Power Amplifier (Balanced) XP1027-BD 27.0-31.0 21.0 +/- 1.0 +35.5 (Psat) +43.0 2.0 A @ 5.5 DIE Outline S-Param S / D Power Amplifier XP1026-BD 27.0-32.0 21.0 +/- 1.0 +33.0 (Psat) +40.0 900 @ 5.5 DIE Outline S-Param S / D Power Amplifier (Detector) XP1003-BD 27.0-35.0 15.0 +/- 1.0 +24.0 +34.0 440 @ 4.5 DIE Outline P / D Power Amplifier (Detector) XP1017-BD 30.0-36.0 16.0 +/- 0.5 +24.0 +33.0 440 @ 4.5 DIE Outline S-Param P / D Power Amplifier XP1032-BD 32.0-36.0 25.0 +/-0.5 +33.5 (Psat) - 1.9 A @ 5.5 DIE Outline S-Param S / D Power Amplifier XP1056-BD 34.5-38.0 13.0 +/-1.0 +26.0 (Psat) - 280 @ 6.0 DIE Outline S-Param D Power Amplifier (Doubler/SMT) XX1001-QK 18.0-21.0 (fin) 36.0-42.0 (fout) 25.0 +/- 0.5 +25.0 (Psat) - 530 @ 4.5 -QK 7x7 mm Layout I / S / P / D Power Amplifier (SMT) XP1031-QK 37.0-40.0 25.0 +/-2.5 +25.0 +35.5 600 @ 4.0 -QK 7x7mm Layout P / D Power Amplifier (SMT) XP1080-QU 37.0-40.0 25.0 +/-2.5 +27.0 +38.0 1.0 A @ 4.0 -QU 7x7mm Layout P / D Power Amplifier XP1031-BD 37.0-42.0 23.0 +/-2.5 +25.0 +35.0 600 @ 5.0 DIE Outline P / D Power Amplifier (Balanced) XP1015-BD 43.5-46.5 13.0 +/- 1.0 +31.0 - 2.8 A @ 5.0 DIE Outline S-Param P / D Power Amplifier XP1016-BD 43.5-46.5 14.0 +/- 1.0 +24.0 - 720 @ 5.0 DIE Outline S-Param P / D Power Amplifier XP1028-BD 43.5-46.5 14.0 +/- 1.0 +29.0 - 1.4 A @ 5.0 DIE Outline P / D *EVM = 2.5% @ 30 dBm **EVM = 2.5% @ 29 dBm ***EVM = 2.5% @ 27 dBm

Back To Top

.

Power GaAs FETs, Packaged

Part # Freq (GHz) P1dB (dBm) Gain (dB) OIP3 (dBm) Padded Eff % Icc (mA) Test Volts (V) Rth Deg/W Package Markets/ Notices XF1000-DB (@ 2 GHz) DC-6.0 +34.0 14.0 +46.5 42 600 +8.0 15.0 -DB 3x6mm I / S / D XF1001-SC (@ 2 GHz) DC-6.0 +30.0 15.5 +46.5 42 300 +8.0 30.0 -SC S-Param I / S / D

Back To Top

.

Prescalers & Dividers

Description Part # RF In (GHz) RF Out (GHz) Pin (dBm) Pout (dBm) Bias (mA @ V) DXF Markets/ Notices Divide-by-Four XE1001-BD 2.0-19.0 0.5-4.25 -20.0-+5.0 - 80 @ 5.0 DIE P / D Divide-by-Four (QFN) XE1001-QT 2.0-19.0 0.5-4.25 -20.0-+5.0 - 80 @ 5.0 -QT 3x3mm P / D

Back To Top

.

Receivers

Description Part # RF Freq. (GHz) LO Freq. (GHz) IF Band- width (GHz) Conver- sion Gain (dB) Noise Figure (dB) Image Rejec- tion (dBc) LO Input Power (dBm) Bias (mA @ V) DXF / Package Markets/ Notices Receiver XR1011-BD 4.5-10.5 3.0-12.0 DC-3.5 14.0 1.6 20.0 +5.0 130 @ 4.0 Outline P / D Receiver (QFN) XR1011-QH 4.5-10.5 3.0-12.0 DC-3.5 13.0 1.8 20.0 +5.0 130 @ 4.0 -QH 4x4mm Layout P / D Receiver (QFN) XR1015-QH 10.0-16.0 7.0-19.0 DC-3.5 12.0 2.5 20.0 +5.0 170 @ 4.0 -QH 4x4mm P / D Receiver (SMT) XR1007-QD 10.0-18.0 8.0-20.0 DC-3.0 13.5 2.7 20.0 +3.0 150 @ 5.0 -QD 7x7mm P / D Receiver (LO Buffer) XR1007-BD  11.0-17.0 8.0-20.0 DC-3.0 13.5 2.2 20.0 +3.0 150 @ 5.0 Outline P / D Receiver (LO Buffer) XR1009-BD 12.0-36.0 6.0-18.0 DC-3.5 10.0 3.0 20.0 +4.0 180 @ 4.0 Outline P / D Receiver XR1017-QH 14.0-30.0 5.0-17.0 DC-4.0 10.0 2.7 15.0 +4.0 210 @ 4.0 -QH 4x4mm P / D Receiver (SMT) XR1002-QB 18.0-30.0 14.0-34.0 DC-4.0 2.0-14.0 3.0 25.0 +15.0 135 @ 4.5 -QB 7x7mm P / D Receiver (Attenuator) XR1002-BD 18.0-34.0 14.0-38.0 DC-4.0 2.0-14.0 3.0 25.0 +15.0 135 @ 4.5 Outline P / D Receiver (LO Buffer) XR1005-BD 19.0-26.0 8.0-14.5 DC-3.0 8.0 2.5 20.0 +2.0 250 @ 4.0 Outline P / D Receiver (SMT) XR1005-QD 19.0-26.0 8.0-14.5 DC-3.0 8.0 3.0 20.0 +2.0 250 @ 4.0 -QD 7x7mm P / D Receiver (QFN) XR1019-QH 27.0-34.0 12.5-18.0 DC-2.0 13.0 2.5 20.0 +4.0 128 @ 3.0 -QH 4x4mm P / D Receiver (LO Buffer) XR1004-BD 30.0-46.0 15.0-25.0 DC-4.0 9.0 3.5 18.0 +2.0 200 @ 4.0 Outline P / D Receiver (SMT) XR1008-QB 35.0-45.0 16.0-24.0 DC-4.0 9.0 3.5 18.0 +2.0 200 @ 4.0 -QB 7x7mm P / D

Back To Top

.

Switches

Description Part # Freq. (GHz) Insertion Loss (dB) Input P1dB (dBm) Isolation (dB) VSWR (dB) Bias (mA @ V) Markets/ Notices Switch CSW0118-BD 0.5-18.0 1.8 +20.0 -30 1.5:1 150 @ 3.0 I / D

Back To Top

.

Transmitters

Description Part # RF Freq. (GHz) LO Freq. (GHz) IF Band- width (GHz) Conver- sion Gain (dB) LO Input Power (dBm) Output P1dB (dBm) Output IP3 (dBm) Bias (mA @ V) DXF/ Package Markets/ Notices Up-Converter (QFN) XU1012-QH 5.6-10.5 7.5-12.0 DC-2.5 8.0 3.0-9.0 - +25.0 160 @ 5.0 -QH 4x4mm P / D Up-Converter XU1014-BD 8.0-18.0 5.0-21.0 DC-3.5 -10.0 +5.0 +2.0 +12.0 80 @ 4.0 Outline P / D Up-Converter (QFN) XU1014-QH 8.0-18.0 5.0-21.0 DC-3.5 -10.0 +5.0 +2.0 +12.0 80 @ 4.0 -QH 4x4mm P / D Up-Converter XU1010-BD 17.0-34.0 8.0-20.0 DC-3.5 -10.0 +2.0 +5.0 +15.0 190 @ 4.0 45 @ -4.0 Outline P / D Up-Converter (QFN) XU1010-QH 17.0-34.0 8.0-20.0 DC-3.5 -10.0 +2.0 +5.0 +15.0 190 @ 4.0 45 @ -4.0 -QH 4x4mm P / D Transmitter (LO Buffer/GC) XU1009-BD 18.0-36.0 7.0-20.0 DC-4.0 9.0 +2.0 +16.0 +25.0 515 @ 5.0 Outline P / D Up-Converter (QFN) XU1016-QH 35.0-40.0 15.5-22.0 DC-3.5 7.0 +3.0 +20.0 +30.0 360 @ 4.0 -QH (4x4mm) P / D Up-Converter (QFN) XU1019-QH 37.0-40.0 16.75-20.0 DC-3.5 7.0 +3.0 - +27.0 390 @ 4.0 7 @ -3.0 -QH 4x4mm P / D

Back To Top

.